The main challenge of installing a marine stereo system is the watery surroundings and the wetness that might act as a barrier for the working mode of the marine speakers. When it comes to electronic items, one has to be extremely careful regarding the avoidance of unnecessary moisture and wetness. Extreme care must be taken in the case of mounting a stereo in order to ensure the mounts are able to go through the barriers caused by the pounding waves. The marine speakers are designed in such a way that they are compatible with the watery environment and the rocking mode of the boat. As compared to the standard automotive stereo system, marine sound systems are much more water-resistant and also more effective in their working aspect. The water resistance works accordingly due to the water seal which is provided on the marine stereos. They also provide shock resistance and make sure that the stereo can handle the rocking movement of a boat.
Have a glance at some of the most effective tips if you are planning to install one of the marine audio equipment in your yacht! Here are 10 helpful tips for you-
The proper selection of the location where the stereo is to be installed must be done very carefully in order to prevent any barriers caused due to the water around. The stereo unit is designed in such a way that it is water-resistant and waterproof. The splashing of water can cause certain harm to the audio system as it is an electronic item. In this case, hinged plastic splash guards are mounted over the faceplate of the system. Be careful regarding easy access to the input port.
2. Mounting the stereo system for further protection
The dashboard area and the cabin area is where the unit is mounted for complete protection from external barriers. The first area of mounting is typically the dashboard area, whereas the second area is the cabin. Be it the dashboard or the cabin, proper rules are applied regarding the proper installation in both the areas. The design of the marine audio system is designed in such a way that it is supposed to be mounted horizontally. Certain harm may be caused if the system is mounted vertically. A perfect mounting angle is considered to be up to 20 degrees which is suitable for most boat types.
3. Mounting the speakers for absolutely perfect sound
The acoustics of the boat plays a major role when it comes to generating the best sound from the audio system. Normally, the sound from the speaker is known to bounce off the walls which in turn return to the ear of the listener. In the case of a boat or yacht, the sound is not known to reflect back in the cockpit. Keep in mind to select speakers based on high wattage rating. Otherwise it might damage the speaker on turning up the volume.
4. Selecting the right speaker type
There are basically two types of speakers- flush mount and box speaker. Flush mount speakers are typically round in shape and must be installed into a flat surface. This speaker is quite attractive in look and also the best part is that it does not take much space away from the passenger compartment. Box speakers are named so as they are already pre-mounted in a box which takes up space as compared to flush mount speakers. The optimization of the speaker enclosure provides the absolute best sound. Make sure that in the case of flush-mounted speakers, there is some space behind the speaker in order for the air to move freely. The mounting area of the speaker must be completely enclosed with no openings, so that the surrounding air is able to move in or out of the space.
5. The priority for location selection
You will find an installation guide with the system which gives you a good idea about where and how to mount the stereo. The system is pretty heavy and you must know that most of the boats are made of thin fiberglass. As most interior glass panels are thin, the panel may be reinforced in case the stereo unit is being mounted into a fiberglass panel. This is about 0.13-0.23 inch thick. A mounting stud is attached to most stereo units which are used in all sorts of marine applications.
6. System wiring in order to avoid bad connections
The main thing you should consider when wiring a stereo system in your yacht or boat is that the boat is fiberglass which acts as an excellent electrical insulator. The atmosphere is very highly corrosive for which the wire is to be covered by a liquid electrical tape. All the wiring connections must be done carefully so that the connections are absolute and efficient. The corrosion and moisture has to be prevented at any cost, otherwise the entire system will not function according to your will which will end up in a disaster for your yacht.
7. The numbers of speakers to be used
There are typically two speakers in a stereo system which is a left and a right one. The new ones have five main speakers along with a subwoofer. You must be aware of the main speaker locations which are front right, front left, front center, back right and back left. All the good work depends on the wiring of the speakers for which several speakers are mounted to a standard stereo. As higher is the impedance, lower is the volume produced. This impedance determines the operation of the stereo and the amount of volume produced.
8. Implement a non-corrosive hardware
The best tip is that stainless steel mounting hardware should be used as most of them are made of steel. As steel has a high tendency to easily undergo rusting in moisture prone areas, use of stainless steel is highly required. Do not use wood or other metal screws on fiberglass which must be replaced with nut screws. Overall, non-corrosive hardware not only provides optimum results, but also makes sure that the speaker system has a long lifespan.
9. The idea of buying a marine audio
You would definitely prefer a vast selection of stereo systems for your boat or yacht because of why marine audios are the best choice. You can easily access them through the internet by searching for marine stereo systems. This ensures that you have multiple selection options when it comes to installing a marine stereo system.
10. The installation of a sub-woofer
Why is it so necessary to install a subwoofer? Well, the boat or yacht acoustics vary depending on the rocking movement of the marine ride. The high noise of the wind might also act as a sound barrier for the stereo system, especially when your yacht is cruising at a high speed. All these problems can be dealt with if a good subwoofer is installed which makes sure that the vibrations are transferred off through the fiberglass. This allows the sound to be clear and loud; thus making the stereo system a right fit for your boat or yacht.
Have you heard of CAR PLANET? If not, then you must…..a leading dealer of top brands in the field of marine audio systems. So what makes Car Planet so leading and efficient? Well, they have a team of factory trained technicians and engineers who serve you with the best speakers of quality for your marine ride. The services offered by Car Planet are accountable and flexible according to your needs of marine audio modifications as well as installation. Be it fabrication, installation, up-gradation, timely delivery, detailing or customer satisfaction, you can trust on their professionalism. One more thing in which they stand out is the fact that they design their marine audio systems in such a way that they are highly resistant to moisture and other watery barriers as you sail through the open waters in your favourite marine ride.
Marine Sound Damping Technology is the most crucial element for marine audio systems. The good news is that Car Planet offers the best Marine Sound Damping and is the only company in the UAE that offers Sound Damping for Marine audio systems.
Be well aware of the marine speaker system and its many working aspects, so that you can have the best sound experience in your luxury yacht. Go ahead and install the perfect one based on the above mentioned criteria so that you can enjoy the best quality audio while you are on your ride.
